9030367 E7 Performance Views
6-7
MIM Performance View
IRBM, IRM2, IRM3 and MiniMMAC Hubs
You can also access the MIM Performance View from the Device View as
follows:
1. Click on the Module Label with the right mouse button to access the Icon
Subviews menu.
2. Select Module Performance from the Icon Subviews menu.
IRBM, IRM2, IRM3 and MiniMMAC Hubs
The MIM Performance View displays monitoring point performance statistics
gathered by SPECTRUM. These statistics include load, error rate, frame rate
and collision rate. The banner across the top of the Performance View provides
information about the monitoring point. The border color of the banner
indicates the device status. The border area contains the following fields:
Name
The user-defined or default name of the model.
Location
The location of the device as entered in the Creation dialog box when the
model was created. If no location has been specified, this field displays the
model name of the SPECTRUM location view containing the device.
Network Address
The network IP address of the device.
Device Type
The SPECTRUM Model Type (e.g., Hub_CSI_IRBM).
System Up Time
The time, displayed in days+hours:minutes:seconds, that the device has been
online.
Slot Number
The number of the hub slot in which the module is installed.
The Performance View includes a multi-attribute line graph that shows
network load in green, frame rate in blue, error rate in orange and collision
rate in yellow. The IRM3 has an additional field, Active Users, which displays
the number of active users detected by the hub. Table 6-1 displays the
categories of information supplied by the MIM Performance View.
In addition to the banner and the Multi-Attribute Line Graph, the
Performance View provides the following buttons: