Cabletron Systems Ethernet Hubs manual 0001061a

	Cabletron Ethernet Hub Alarms and Events
Table 7-1.	Events and Alarms (Continued)
	Event Message	Probable Cause Message
	0001061a	0001061a
	ENVIRONMENT TEMPERATURE HOT	This device detects that the
	detected by {v} (name - {v}).	temperature within the device
		has reached a HOT condition.
	0001061b	0001061b
	Environment Voltage Low detected	A board detects that its power
	by board in slot {v} (Instance	supply voltage is low.
	ID {v}) of {v} (name - {v}).
	0001061c	0001061c
	Environment Temperature has	Not Applicable.
	returned to a normal state at
	slot {I 1} (Instance ID {0 2}),
	has been detected by {v} (name -
	{v}).
	0001061d	0001061d
	Environment Voltage has returned	Not Applicable.
	to a normal state, has been
	detected by {v} (name - {v}).
	0001061e	0001061e
	A fan in the system’s chassis is	The device detects that a fan in
	operating at an abnormal RPM	the system’s chassis is
	rate, has been detected by {v}	operating at an abnormal RPM
	(name - {v}).	rate.
	0001061f	0001061f
	A fan in the system’s chassis is	Not Applicable.
	operating at a normal RPM rate,
	has been detected by {v} (name -
	{v}).
	00010620	00010620
	User defined broadcast	Device Broadcast Threshold
	threshold, {v} broadcast packets	Exceeded.
	within {v} seconds, exceeded on
	{v} (name - {v}).	This trap will be generated when
		the broadcast (packets per time
		interval) has been exceeded for
		the entire MMAC.

9030367 E7	Event and Alarm Messages
	7-7