Cabletron Systems Ethernet Hubs Counters, Restart Device, Device Redundancy, Device Discover

Configuration View Description

Control View

Network Address

The network IP address (e.g., 132.177.118.24). This field does not appear in the IRM Control View.

Counters

This button allows you to reset all of the device’s counters to 0.

Restart Device

This button allows you to restart the device.

Device Redundancy

This button allows you to reset the redundancy for the entire hub. This button is not available in the IRBM or the IRM Control Views.

Device Discover

This button causes the device and all devices connected to it to send Link-up traps. This button is not available in the IRM, IRM3, or MRXI Control Views.

Source Address Age Time

The number of seconds that a source address is not detected before it is removed from the source address table. This field does not appear in the IRM or MRXI Control Views.

Source Address Traps

This button controls sending of source address related traps. Possible options are TrapsOn and TrapsOff. This button is not available in the IRM or MRXI Control Views.

Source Address Lock

This button indicates whether detection of source addresses on a port that are not in the source address table will cause the port to be turned off. Possible states are LockOff and LockOn. If a port is turned off, an event and alarm will be generated to warn you of this condition. This button is not available in the IRM or MRXI Control Views.

Configuration Views	Cabletron Ethernet Hubs
4-8	Management Module Guide