9030367 E7 Device Views
2-9
Logical MIM Representation
Port Performance
Indicates the frame rate for the port. You can change this display using the
Gauge Control Panel, which is described later in this chapter. When you have
accessed the Logical MIM representation through the Physical MIM
representation, the Port Performance label displays a gauge. The rates or
percentages measured by this gauge depend on the setting of the Logical
Gauges and Gauge Mode buttons. You can double-click on the Port
Performance Gauge to bring up the port performance view, which is described
in Chapter6.
You can also access several generic views from the View and Device Menu
pulldown menus. These generic views include:
• Configuration View
• Performance View
• Diagnostic View
• Application View
• Display Logical/Physical MIMs
The procedures for displaying these generic views are given in the section
titled “Changing MIM Representations” later in this chapter.
Figures 2-4 through 2-6 show some examples of Device Views for Cabletron
hubs. The examples show one or more modules displayed in a Logical
Representation.
Table 2-3. Port Status Values
Status Color Code
NLNK (No link) Yellow
ON Green
OFF Blue
SEG (Segmented) Red
NSQE Green (IRBM)
SQE Green (IRBM)
CL Blue (IRBM)
NOTE
Some modules may not support logical MIM representations. Refer to the
specific module’s hardware documentation.