Cabletron Systems Ethernet Hubs Battery Capacity, Battery Volts Out, AC Line Volts, UPS Model

Application View Description

UPS Statistics View

The UPS Statistics View is similar to a hub Performance View. For more information on how to use this type of view, refer to Chapter 6, Performance Views. The UPS Statistics View displays the following information:

Name

The user-defined or default name of the model.

Location

The location of the device as entered in the Creation dialog box when the model was created. If no location has been specified, this field displays the model name of the SPECTRUM location view containing the device.

Network Address

The Internet Protocol (IP) address of the device.

Device Type

The SPECTRUM Model Type (e.g., Hub_CSI_IRM3).

System Up Time

The time, displayed in days+hours:minutes:seconds, that the device has been on-line.

Battery Capacity

The current battery capacity of the UPS. Values are displayed as a percentage. Additional fields show the Average and the Peak Value of this quantity.

Battery Volts Out

The battery output voltage. Additional fields show the Average and the Peak Value of this quantity.

AC Line Volts In

The input line voltage. Additional fields show the Average and the Peak Value of this quantity.

UPS Model

This button allows you to select the Model of UPS in use. Possible selections are: 370, 400, 600, 900, 1250, and 2000. The model assignment is not information gathered from the UPS; rather, it is an assignment made from the IRM3. This model type code needs to be assigned after the cable has been connected between the IRM3 and the UPS and before any access to the UPS MIB can take place.

UPS Status

Displays the test states. Possible states include Unit_OK, Unit_Failed, Bad_Battery, No_Recent_Tests, and Unit_In_Test.

UPS Uptime in Hours

The amount of time that the UPS connected to the IRM3 has been running since start-up.

9030367 E7	Application Views
	3-13