Cabletron Systems Ethernet Hubs manual Bridge Information, Configuration View Buttons

Configuration View Description

Bridge Information

Bridge Information

This section of the Configuration View is available only for the IRBM hub. The Configuration View button found in this section accesses the IRBM Bridge Configuration View, which is described later in this chapter.

Configuration View Buttons

This section of the Configuration View contains buttons that provide access to device-specific information views. This section provides the following buttons:

Find Source Address

This button allows you to access the hub’s Source Address View, which is described later in this chapter. This button is not available in the IRM or the MRXI Configuration Views.

Source Address Table

This button allows you to access the Device Source Address Table, which is described later in this chapter. This button is not available in the IRM or the MRXI Configuration Views.

Control

This button allows you to access the Control View, which is described later in this chapter.

Config Alarms

This button allows you to access the Configure Alarms View, which is described later in this chapter. This button is not available in the IRM Configuration View.

Redundancy

This button allows you to access the MMAC Redundancy View, which is described later in this chapter. This button is not available in the IRBM or the IRM Configuration Views.

9030367 E7	Configuration Views
	4-5