Cabletron Systems Ethernet Hubs manual Additional Configuration View

Configuration View Description

Redundancy View

Table 4-6. DownLoad Software View Field Definitions (Continued)

Field	Definition
Force On Boot	When set to Server, the boot software will attempt to boot
	from the TFTP boot server. If no boot is found and flash
	memory is valid, the device will boot from the flash memory
	regardless of the setting for this variable. When set to
	Flash_Memory, the device will boot from flash memory.
TFTP Request	A user-defined IP address of the server to be used when the
Host	firmware is to be loaded over the network.
TFTP Request	A user-defined filename that is requested of the server when
FileName	the firmware is to be loaded over the network.
RAM To Flash	When set to Commit, the boot software will erase the flash
	memory, compress the download code, and save the
	compressed image into flash memory.
Cold Boot	When set to Initiate, the boot software will initiate a reboot
	of the system. All MIB variables in this view used to control
	the exact nature of the download should be set prior to the
	setting of this variable.

Additional Configuration View

You can access the Additional Configuration View by clicking the Additional Configuration button in the Configuration View. In addition to the model name and network address, this view shows three panels, each with eight slot designations. The panels are labeled Ethernet MIMs, Token Ring MIMs, and FDDI MIMs. When the button next to a slot number is depressed, it means that a MIM of that type is installed in the slot. This view is available only for the IRM2 and IRM3 hubs.

Community and Trap Table

You can access the Community and Trap Table by clicking the Community Table in the Configuration View. The Sort buttons allow you to alter the display format of the table. The Find button allows you to search the name column to locate a specific community name. Clicking on a column heading allows you to access the Sort and Find Buttons. The Update button allows you to update the contents of the table. Double-clicking on any entry in the Community and Trap Table opens the Community Table Detail View specific to the selected table entry. This view allows you to modify the statistics and parameters for the device. Table 4-7provides definitions of the Community Table Detail View. The Community and Trap Table is available only for the IRM2 and IRM3 hubs. This table provides the following information:

9030367 E7	Configuration Views
	4-15