Tascam DV-RA1000HD owner manual Supplied accessories, Rack-mounting the unit, Copyright

1 − Introduction

9 - “Using with a computer” (p. 59) Describes how to use the DV-RA1000HD when it is connected to a computer.

10 - “Specifications” (p. 61) Includes the specifi- cations and diagrams of the DV-RA1000HD.

Notes and warnings

WARNING

These warnings should be taken very seriously. They describe situations which can cause injury, or damage to equipment if the instructions are not fol- lowed.

CAUTION

Cautions show that you may lose data or perfor-

mance may suffer if the instructions are not followed.

NOTE

These notes provide additional explanations for special cases, etc.

TIP

We give hints and tips on using the unit in this way.

Copyright

Windows, Windows XP, Windows 2000, Windows Me, Windows 98 and Windows 95 are trademarks of Microsoft Corporation.

Macintosh, MacOS, and MacOS X are trademarks of Apple Computer.

NOTE

This product is designed to help you record and reproduce sound works to which you own the copy- right, or where you have obtained permission from the copyright holder or the rightful licensor. Unless

you own the copyright, or have obtained the ap- propriate permission from the copyright holder or the rightful licensor, your unauthorized recording, reproduction or distribution thereof may result in severe criminal penalties under copyright laws and international copyright treaties. If you are uncertain about your rights, contact your legal advisor. Under no circumstances will TEAC Corporation be re- sponsible for the consequences of any illegal copy- ing performed using the DV-RA1000HD.

Supplied accessories

In addition to this manual, the DV-RA1000HD has
been packed with the following:
• RC-RA1000 wired remote control unit	1
• AC power cable	1
• A rack-mounting screw kit (screws and washers)	1
• A warranty card	1

Contact your TASCAM supplier if any of these items are missing.

NOTE

When transporting the unit, always use the origi- nal packing materials. For this reason, we strongly recommend that you save all the packing materials that came with the unit, in case you need to trans- port it in the future.

In addition, please close the disc tray when trans- porting the unit.

Rack-mounting the unit

If you are mounting the unit in a rack, leave 1U of space above it and 4 inch (10 cm) or more of space at the rear.

Use the rack-mounting kit to mount the unit in a stan- dard 19-inch equipment rack, as shown in this section. Remove the feet of the unit before mounting.

Figure 1.1: Installing the DV-RA1000HD

TASCAM DV-RA1000HD