Tascam DV-RA1000HD owner manual Repeat playback DVD HD, Single track playback DVD HD

5 − CD playback & recording

•Delete the last track in the program list using the F2 (DEL) key.

•Confirm the playback order and return to the previous screen using the ENTER key or

F5 (HOME) key (if this screen was entered using the RC-RA1000, the home screen is shown).

•You can also use the remote control unit key equivalents to perform these operations as well as the number keys for direct program- ming.

•When programmed playback mode is on, pressing the PGM switch on the play page of the virtual front panel or the PGM key on the remote control unit briefly to turn pro- grammed playback off. Pressing the PGM switch or PGM key for at least one second brings up the program screen.

NOTE

•If you turn programmed playback on while the recorder is in playback ready mode or playing, a track set to “ready” in the program list or a track that is currently playing will be automatically reg- istered in the program list.

If you turn programmed playback mode on while the recorder is stopped, no track will be regis- tered in the program list.

•If you press the STOP key while programmed playback mode is on, the first track on the pro- gram list will enter playback ready mode.

•If you press the ENTER key while the program screen is displayed and no track has been yet registered in the program list, programmed play- back mode will be turned off.

•During playback, you cannot delete any tracks in the program list using the F2 (DEL) key.

•Pressing the CANCEL key while the program screen is being displayed will delete the regis- tered program and programmed playback mode will be turned off.

Repeat playback DVD HD

Use the Virtual Front Panel (see “The virtual front panel (VFP)” on page 23) RPT switch to change between single-track and whole disc repeat (and off).

NOTE

The repeat function cannot be used with the single play function. If either the single play or repeat function is enabled, it is disabled when the other function is enabled.

A-B repeat Use the A-Bkey on the remote control unit to set the A and B points (these must be within the same track). The first press sets the A point, the next press sets the B point, and a third press cancels the loop. Setting a point in another track clears the previous settings.

Press the STOP key to cancel the A-B repeat function.

The remote control unit’s REPEAT key also allows these choices, but the RC-RA1000 also adds an A-B repeat loop.

Single track playback DVD HD

When the SNGL switch is turned on from the vir- tual front panel, or using the SINGLE key of the

RC-RA1000, the DV-RA1000HD plays to the end of the current track only, and then stops playback.

NOTE

This function cannot be used together with repeat playback.

Auto space playback DVD HD

When the ASPC switch is turned on from the virtual front panel, the DV-RA1000HD inserts a gap of two seconds between tracks when playing back a disc.

This can be useful when recording to an analog tape deck which can use these silences to detect track divi- sions.

TASCAM DV-RA1000HD 31