Tascam DV-RA1000HD Jog playback DVD HD, Pitch change DVD HD, Auto cue DVD HD, Auto ready DVD HD

5 − CD playback & recording

Jog playback DVD HD

You can use the JOG/DATA dial to jog the playback position backwards and forwards.

•Press and hold the READY key and press the

PLAY key.

•Both keys flash. You can now use the

JOG/DATA dial to move the play position back and forwards through the current track/file.

•Press the READY key alone to exit from the jog mode, and leave the playback position at the position selected with the JOG/DATA dial.

Press the STOP key to stop playback and cancel the jog mode. If the resume function has been turned on, playback is stopped at the point at which you pressed the STOP key. Press the PLAY key to resume normal play- back from that point.

•You can also use the JOG/DATA keys on the

RC-RA1000 remote control unit as jog keys.

NOTE

This feature cannot be used in DSD mode.

Pitch change DVD HD

This is another VFP function (see “The virtual front panel (VFP)” on page 23) for playback only.

The reference clock must be set to the internal clock for this feature to operate.

Move the cursor to the PITCH switch and press ENTER briefly to turn on pitch change.

Press and hold ENTER for about a second to enter the pitch change setting screen:

Figure 5.2: Pitch control

Use the F1 and F2 keys to navigate, and the JOG/DATA dial to set the value of the pitch (and speed) up to ±6% away from nominal.

Press ENTER to make the setting.

Auto cue DVD HD

When the auto cue function is turned on, cueing the playback position to the beginning of a track will locate and pause at the first point in the track at which the audio rises, rather than the top of the track. “The point at which the audio rises” refers to the first point in a track at which the audio signal rises above the speci- fied threshold. (See “Setting the sound threshold level (SOUND LEVEL)” on page 35.)

This feature can be used together with the auto ready function. (See “Auto ready” below.)

NOTE

•Note that this function is not available on DVDs recorded in DSD mode.

•If the audio signal in a track does not exceed the specified threshold level, the top of the track will be located and the transport section will be paused.

Use the Virtual Front Panel (see “The virtual front panel (VFP)” on page 23) ACUE function or the remote control unit’s A.CUE key to turn this function on or off.

Auto ready DVD HD

This automatically cues up the playback position to the start of the next track after a track has been played and puts the DV-RA1000HD into the ready position (the READY key lights).

It can be combined with the Auto cue function (see “Auto cue” above) to position the playback at the start of the recorded material.

NOTE

This feature can also be used with DVD playback.

32 TASCAM DV-RA1000HD