MANUAL
2.1 Wooden Woofer System S21114
INTRODUCTION
Thank you for using NEUTAC 2.1 Wooden Woofer System. This
SPECIFICATION |
|
|
| |
Model Code: S21114 |
|
|
| |
Normal Power Output (Total): 22W |
|
|
| |
Speaker Driver Unit: | Size: |
|
| |
• | Woofer: 3”4Ω10W; | • | Woofer | 111 x 230 x 185mm |
• Satellite: 1”8Ω3W x 4 | • | Satellite | 62 x 69 x 168mm | |
Frequency Response Range: | Power Supply Input: | |||
• | • | AC 230V/50Hz | ||
CONNECTION
*Please make sure the system and the devices are Power off before establish any connection.
1. Playstation 1 and 2/ XBox/Game Cube
Step 1. Connect the game console to the VIDEO IN and AUDIO IN section, which is located at the back of the woofer by using the 1To3 RCA cable provided with the game console.
Step 2. Connect the TV to the VIDEO OUT and AUDIO OUT section, which is located at the back of the woofer by using the 3To3 RCA cable attached with the speaker system.
Step 3. Connect the two satellites to the woofer by using the built in cable on the satellites.
*Please refer to Figure 1 for cable connection
Figure 1
2.DVD/VCD Player
Step 1. Connect the DVD/VCD player to the VIDEO IN and AUDIO IN section, which is located at the back of the woofer by using the 1To3 RCA / 2To3 RCA / 3To3 RCA cable. This cable may have been provided with your DVD/VCD player.
Step 2. Connect the TV to the VIDEO OUT and AUDIO OUT section, which is located at the back of the woofer by using the 3To3 RCA cable attached with the speaker system.
Step 3. Connect the two satellites to the woofer by using the built in cable on the satellites.
*Please refer to Figure 2 for cable connection
3.PC/CD Player/MP3 Player/Game Boy
Figure 2
Step 1. Connect the PC/CD Player/MP3 player to the AUDIO IN section, which is located at the back of the woofer by using the 1To2 RCA cable attached with the speaker system.
Step 2. Connect the two satellites to the woofer by using the built in cable on the satellites.
*Please refer to Figure 3 for cable connection
Figure 3
