Before you begin
Using the armband
1.Slide the player into the holder of the armband by aligning with the arrow on the holder.
Player
USB port of your computer
1
2.Slide the end of the armband through the ring and secure with the velcro tape.
2
USB cable (supplied)
• It might take several seconds for the player to be detected. Click Refresh in My Computer or Windows Explorer to make sure the player has been detected.
•The player is capable of transferring files at USB 2.0. If USB 2.0 port is available on your computer, use it to connect to your player.
The player is still backward compatible with the older USB 1.1 ports. However, you will not be able to take full advantage of the potential speed increase.
•IMPORTANT: Don’t disconnect the USB cable to the PC or the player during the software installation.
•If the installer does not
Connecting to the computer
•Connect the player to your computer with the USB cable provided. The player will turn on automatically.
•The player will be connected in MSC (Mass Storage Class) mode. It will appear as a drive letter on your computer and behave as a detachable drive for file transfer in one or both directions.
•The RCA EasyRip™ Media Software installer (stored in the player*) will launch automatically. Click NEXT to begin the installation and follow the instructions to install the software on your PC.
•The software installer can be deleted from the player after installation to free up more storage spaces.
Charging the player
The player charges automatically every time you connect it to your computer. To fully charge the player, make sure your computer is on and the device is connected for at least 3 hours. Refer to the battery level icon on the display to check the battery level. Recharge the player when the icon is empty.
* The latest software can be downloaded from www.rcaaudiovideo.com.
9