PREPARATION
LINE OUT | LINE IN | To AC Outlet |
| ||
Jacks | Jacks |
|
READ THIS BEFORE OPERATING | CONNECTIONS |
•Choose a location for your cassette deck carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, heat, cold, or moisture.
•Do not open the cabinet as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the set, contact your dealer.
•When removing the power plug from the wall outlet, always pull directly on the plug, never yank the cord.
•Do not attempt to clean the unit with chemical solvents, as this might damage the finish. Use a clean, dry cloth.
•Keep this manual in a safe place for future reference.
Connect your cassette deck to your receiver or amplifier using the supplied audio cables.
1.Using one of the audio cables, connect the cassette deck’s L and R LINE OUT jacks to the receiver or amplifier’s left and right tape input jacks.
2.Using the other audio cable, connect the cassette deck’s LINE IN jacks to the receiver or amplifier’s tape output jacks.
Note: If you are not sure which receiver/amplifier jacks to use, refer to your receiver or amplifier’s owner’s manual.
3.Plug the AC power cord into an AC wall socket.
6
