RCA SCT-520 manual Operation, Using Continuous Play Deck 2 to Deck, Dubbing a Cassette Tape

OPERATION
POWER	PLAY	STOP/EJECT	RECORD	DOLBY NR	DUBBING SPEED/
					REC LEVEL ATT

1.To turn on the cassette deck, press POWER.

2.Gently press STOP/EJECT (for DECK 1 or DECK 2) and load a cassette tape with its open end down and the full reel to the left.

3.Press DOLBY NR IN or OUT to turn Dolby Noise Reduction on or off.

4.Press PLAY for the deck you selected in Step 2.

5.Press STOP/EJECT for the selected deck to stop the tape.

6.Press POWER to turn off the cassette deck.

USING CONTINUOUS PLAY (DECK 2 TO DECK 1)

You can set the cassette deck to play one side of the tape in DECK 2, then automatically play the tape in DECK 1.

1.	Press PAUSE	and PLAY	on DECK 2.
2.	Press PAUSE	and PLAY	on DECK 1.
3.	Press PAUSE	on DECK 2.

Note: If you press PAUSE on DECK 1 instead of DECK 2, the tape in DECK 1 starts moving, but the sound is muted. To correct this, press PAUSE on DECK 1 again, then press PAUSE on DECK 2.

When the tape in DECK 2 finishes playing, the tape in DECK 1 automatically begins playback.

RECORDING A CASSETTE TAPE (DECK 2)

1.Select the source to record from on your receiver/amplifier (CD, VCR, TUNER or DVD).

2.Gently press STOP/EJECT on DECK 2 and insert the tape to be recorded into the cassette holder.

3.Press DOLBY NR IN or OUT to turn Dolby Noise Reduction on or off.

4.Press RECORD . The RECORD indicator lights.

Note: Play the loudest part of the selection you want to record. If the recording levels constantly peak in the +3 dB range (or if the recording is distorted), press REC LEVEL ATT (Record Level Attenuation) in. This reduces the input signal level.

DUBBING A CASSETTE TAPE

1.Insert a prerecorded cassette tape into DECK 1 and a blank tape for recording into DECK 2 to dub one side of a tape.

2.Press DUBBING SPEED to NORM (for normal speed) or HIGH (for high speed dubbing).

Note: At high speed, recording quality is slightly reduced.

3.Press RECORD . The RECORD (and HIGH SPEED, if you set DUBBING SPEED to HIGH) indicator lights.

4.Press PLAY on DECK 1.

5.Press STOP/EJECT on DECK 1 and 2 to stop dubbing.

Note: If the original tape was recorded using Dolby NR, the copy also has Dolby NR, regardless of how DOLBY NR is set. If the tape you copy does not have Dolby NR, you cannot add it to the tape you record.

7