CONNECTIONS
CONNECTING THE RECORDING AND
PLAYBACK CABLES
1.Using one of the supplied audio cables, connect the cassette deck’s left and right LINE OUTPUT jacks to the receiver/amplifier’s left and right tape input jacks.
2.Using the other audio cable, connect the cassette deck’s LINE INPUT jacks to the receiver/amplifier’s tape output jacks.
Note: If you are not sure which receiver/amplifier jacks to use, refer to your receiver/amplifier’s owner’s manual.
CONNECTING POWER
Carefully check all connections. Then plug the AC power cord into a standard AC outlet. The power cord’s plug is polarized and fits only one way.
Warning: To prevent electric shock, do not plug the power cord into an extension cord or other receptacle unless you can fully and easily insert the plug’s blades.
| INPUT |
| TAPE/DCC | TAPE 2 |
|
| |
PHONO | CD | VCR/ | REC | PLAY | REC __ PLAY |
| LINE |
L | L | LD |
| L | L |
| |
|
| INPUT | OUTPUT | ||||
|
|
|
|
|
| REC | PLAY |
|
|
|
|
|
| CONTROL |
|
L 
R | R | R | R | OUT |
R 
RECEIVER/AMPLIFIER |
|
|
|
|
|
| |
L | R | R | L | L | R | R | L |
5
PRB1199A.En.01.09.DOC | 5 | 9/2/99, 9:22 PM |
