SPECIAL FEATURES
FAST-FORWARD/REWIND
To rapidly advance or rewind the tape, press
PAUSE
To temporarily stop playback or recording, press PAUSE.
To restart, press PAUSE again.
Note: You cannot pause while
USING CONTINUOUS PLAY
You can load two cassette tapes to play one after the other.
Notes:
•The cassettes you load should have the same Dolby NR. type. If they do not, the tape that has a different Dolby NR. type than the DOLBY NR switch setting might sound distorted.
•Be sure to set the tapes properly before starting continuous play.
1.Load a cassette tape in each tape compartment, then close the compartment doors.
2.Set DOLBY NR.
3.Press PLAY on Deck 2. The cassette in Deck 2 plays.
4.Adjust the volume, tone, and balance control on your receiver/amplifier for the desired sound.
5.Press PAUSE on Deck 1.
6.Press PLAY on Deck 1.
When Deck 2’s cassette tape ends, Deck 2 automatically stops and Deck 1’s cassette tape plays. When Deck 1’s cassette tape ends, Deck 1 automatically stops.
7
PRB1199A.En.01.09.DOC | 7 | 9/2/99, 9:22 PM |