BASIC OPERATION
Searching for Channels Automatically
1.Press the MENU button on the remote control.
2.Use the 
/ 
buttons then press ENTER button or press 5 button to select the Settings menu.
3.Use the 
/ 
buttons then press ENTER button or press 1 button to select Channel Scan.
4.Repeat the similar operation to start scanning (Begin / Scan Add).
Note:
•The unit MUST be connected to an antenna in order to receive digital TV signals.
•If you wish to stop scanning in the middle of the scanning process, press the MENU button to cancel scan or the EXIT button to exit.
Viewing the TV Channel
Choose one of the below methods to view a television station.
Method 1: Select Channel List on the menu, press 
/ 
button to highlight a channel and press ENTER to start viewing.
Method 2: Press the CH+ / CH - buttons to select a channel, or press the number button on the remote to select channel you want to watch.
Adjusting the Volume
You can control the TV volume using the buttons on the remote control.
VOL
Using these buttons to increase or decrease the volume.
MUTE Button
This button is used to mute the sound of the unit. No audio will be heard once this button is pressed.
To cancel the mute action, press the 
MUTE button again.
Viewing the Information
You can view information of the current TV program by pressing the INFO button on the remote control.
The INFO shows: |
|
| |
Press the INFO button, it shows: |
|
| |
• | The channnel number and the channel name | • | Current time and date |
• | Program hours | • | Program rating |
• | Signal level |
|
|
Press the INFO button again, it will show more corresponding description for current program.
To hide INFO:
Press the INFO button again.
Viewing Signal
To view the signal quality, press the SIGNAL button on the remote control. A beep sound will be heard.
- 10 -
