Specifications, Amplifier, FM Tuner | RCA Stereo Receiver with Remote Control

SPECIFICATIONS

Power Output	100 Watts per Channel into 8 Ohms
	From 40 to 20,000 Hz,
	With No More than 0.5% Total Harmonic Distortion
	Measured Pursuant to the Federal Trade Commission’s
	Trade Regulation Rule on Amplifier Output Power Claims
Input Sensitivity/Impedance:
Phono	2.5 mV/47 kohms
CD, AUX, TAPE MONITOR	200 mV/47 kohms
Signal-to-Noise Ratio (IHF, Short-Circuited, A Network):
Phono	72 dB
CD, AUX, TAPE MONITOR	95 dB
FM Tuner
Frequency Range	87.5–108 MHz
Usable Sensitivity Mono	15 µV/m, EMF
Signal-to-Noise Ratio:
Mono	68 dB
Stereo	63 dB
Distortion Stereo	0.5% (1 kHz)
Alternate Channel Selectivity	45 dB
Stereo Separation	35 dB (1 kHz)
AM Tuner
Frequency Range	530–1720 kHz
Sensitivity (IHF, Loop Antenna)	500 µV/m
Selectivity	25 dB
Signal-to-Noise Ratio	35 dB
General
Power Requirements	120 Volts AC, 60 Hz
Power Consumption	190 Watts
Dimensions (HWD)	511/16 ⋅ 169/16 ⋅137/16 Inches (144 ⋅ 420 ⋅ 321 mm)
Weight	14 lb (6.3 kg)

Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.