PREPARATION

Caution: Make all the necessary connections before you plug in or turn on the receiver.

POSITIONING SPEAKERS

Use 16-gauge (or larger) speaker wire for all speaker connections, and consider possible speaker locations before you decide how much speaker wire you need.

Preparing the Speaker Wires

Speaker (not supplied) placement can make a noticeable difference in your system’s sound. The guidelines in this section will help you choose the best locations. After you use your receiver for a while, you might want to try different locations for your speakers.

Bass response depends largely on speaker location. For strong bass, place the speakers in the corners of the room. If you want even stronger bass, place the speakers directly on the floor. If the bass is too strong, move the speakers slightly away from the corners of the room, or raise them 6 to 18 inches off the floor. You can buy speaker stands at your local RadioShack store.

The distance between the speakers should be about the same as the distance between the normal listening point and the point halfway between the speakers. If you place the speakers too close together, you reduce the stereo separation. If you place them too far apart, you reduce the bass effect and create a hole in the middle of the sound.

Most speakers have a tweeter dispersion angle of about 60 degrees. Ideally, your listening position should be just inside the overlap area of the tweeter dispersion. You can angle the speakers toward you for better stereo effect.

CONNECTING SPEAKERS

Follow these guidelines when you select and connect speakers.

•Only connect speakers that are rated at between 8 and 16 ohms.

•Be sure you properly connect all speakers.

•Do not connect two pairs of speakers to a single set of terminals (A or B) at the same time. When you use two pairs of speakers, connect one pair to the A SPEAKERS terminals and the other pair to the B SPEAKERS terminals.

•RCA and other high-quality speakers have color-coded speaker terminals (red for positive polarity and black for negative polarity). Use these color-coded terminals as a guide to help you properly connect the speakers to the receiver.

Speaker wire consists of two conductors (individual wires) encased in insulation and is usually color-coded or marked with a ridge along one side so you can identify each conductor. Use these markings as a guide to help you properly connect the speakers to your receiver.

Follow these steps to prepare the speaker wires.

1.Cut the speaker wires to the necessary length.

2.Separate the wires about 4 inches on each end.

3.Using a wire stripper, carefully strip about 3/4 inch of insulation from the end of each conductor.

4.Twist the end of each conductor to secure any loose wire strands.

Caution: Twisting the end of each conductor helps prevent a short circuit because stray speaker wire strands do not touch other speaker terminals or any other receiver terminals.

Connecting Speakers to the A and B Terminals

Notes:

•Be sure you connect the receiver’s right and left positive (+) and negative (–) terminals to the speaker’s corresponding right and left positive (+) and negative (–) terminals.

•Fully insert the speaker wires to ensure a good connection. Leave extra wire at the back of the receiver so you do not disconnect the wires when you move the receiver.

Follow these steps to connect each speaker (A right or left or B right or left).

1.Press open the receiver’s positive (+) red lever for the speaker you want to connect and insert the ridged or color-coded conductor’s end into the small hole. Release the lever to secure the conductor.

2.Press open the receiver’s negative (–) black lever for the same speaker and insert the other conductor’s end into the small hole. Release the lever to secure the conductor.

5

Page 4 Page 6
Page 5
Image 5
RCA Stereo Receiver with Remote Control owner manual Preparation, Positioning Speakers, Connecting Speakers
Page 4 Page 6

Stereo Receiver with Remote Control specifications

The RCA Stereo Receiver with Remote Control is a versatile and robust audio device that caters to both casual listeners and audiophiles alike. Renowned for its reliability and performance, this stereo receiver integrates advanced technologies and user-friendly features, providing an enriched listening experience.

One of the standout features of the RCA Stereo Receiver is its powerful amplifier, delivering impressive sound quality with crisp highs and deep, resonant lows. This ensures that music playback remains engaging, regardless of the genre. The receiver typically supports multiple audio formats and has the capability to connect with different types of audio sources, such as CD players, turntables, and smartphones, making it a versatile component for any audio setup.

Another prominent characteristic of the RCA Stereo Receiver is its Bluetooth connectivity. This feature allows users to stream music directly from their smartphones, tablets, or laptops, eliminating the need for cumbersome wiring. The wireless range and stability of Bluetooth technology enable seamless audio playback, enhancing user convenience and flexibility.

The RCA Stereo Receiver also includes a remote control that empowers users with added functionality and convenience. The remote allows users to adjust volume levels, switch between input sources, and manage playback without needing to approach the unit, making it an ideal choice for home entertainment systems where comfort is key.

Additionally, many RCA receivers boast an FM/AM tuner, providing access to a wide range of radio stations for live broadcasts. With presets available for easy navigation, listeners can quickly tune in to their favorite stations. The inclusion of speaker terminals allows for easy connection to various speakers, enabling users to set up their audio systems according to their preferences.

Moreover, the design of the RCA Stereo Receiver is often both elegant and compact, making it an unobtrusive addition to any room. The intuitive interface featured on the front panel ensures easy operation, appealing to users of all ages and technical skills.

In summary, the RCA Stereo Receiver with Remote Control stands out due to its powerful sound performance, Bluetooth capabilities, remote control convenience, FM/AM tuning options, and user-friendly design. This makes it an ideal choice for anyone looking to enhance their audio experience at home. Whether enjoying a quiet evening with familiar tunes or hosting a lively gathering, this receiver promises to deliver impressive sound quality and versatility.
Top Page Image Contents