Chapter 1: Connections and Setup
Connecting More Than Two Computers to the Cable Modem
If you need to connect more than two computers or if you need to connect two computers, but USB is not available, you’ll need the following additional equipment:
10BaseT or 100BaseT Hub or Switch
Straight through, or standard, category 5 Ethernet cable (one for each computer to be connected)
If you have a hub with an uplink port*, a straight through cable can be used in combination with that port in lieu of the crossover cable.
*An uplink port has a small switch on it to change the polarity of the connection. It can accept either a crossover or a straight cable, depending on the setting.
Fig.4: Ethernet Hub Connection
Note: You may need to check with your service provider in order to connect multiple computers.
22
