Using the Remote Control
Remote Control
VCR Function Buttons
(continued)
RECORD
Starts VCR recording.
Used for express recording (XPR).
See page 26.
REW (Rewind)
Rewinds the tape when the VCR is stopped.
Searches the picture in reverse motion during playback.
SEARCH
Displays INDEX and ZERO
SEARCH menus on TV.
Lets you advance tape 60 or 120 seconds during playback.
SLOW
Used for
SPEED (Tape Speed) Selects a recording speed (SP or SLP).
STOP
Stops the normal functions such as record, playback, rewind, fast forward, and pause.
TRACKING Up and Down
Lets you manually reduce the streaks that may appear on the picture during play or pause.
Reduces picture ÒjitterÓ during
TV•VCR
Switches the picture signal so that it either comes from the VCR or the TV channel. See page 10.
TV Function Buttons
Press the TV button to set remote to control a compatible TV. Some buttons may not work with every TV.
CHAN Up or Down Selects next higher or lower channel in the TVÕs channel memory when remote is set to control a TV.
CLEAR
Removes menus or status displays from the screen.
DISPLAY
Shows the status displays on the screen.
Removes menus or displays from the screen.
MUTE
Turns the TV sound on or off.
Numbers (0 through 9 ) Select a channel up to 99 by pressing two numbers.
Select a cable channel over 99 by pressing and holding 1 until 1– – appears on the screen. Then press the other two numbers.
POWER
Turns off a compatible TV when remote is set to control TV.
Used with TV button to turn on a compatible TV, other than RCA, when the remote is programmed to control that TV. See page 11.
PREV CH (Previous Channel) Switches between two channels.
Select one channel and then use the number buttons to select another. Press PREV CH to switch between the two channels.
Works as an ENTER key on some TVs.
VOL (Volume) Up and Down
Raises and lowers sound.
13
