Using the Remote Control
Buttons
Component Buttons
Press one of the buttons to set the remote to operate that component.
TV | VCR | TV¥VCR | POWER | ||
|
|
|
|
|
|
1 2 3
4 5 6 CHANNEL
7 | 8 | 9 |
|
INPUT | 0 | PREV CH | VOLUME |
|
TV
Turns on a compatible RCA, ProScan, or GE TV and sets the remote to control the TV.
Used with POWER button to turn on another brand of TV, other than RCA, when the remote is programmed to control that TV. See page 11.
VCR Function Buttons
VCR
Turns on a compatible RCA, ProScan, or GE VCR and sets remote to control the VCR.
MENU CLEAR DISPLAY MUTE
Press VCR to set remote to control the VCR to use the function buttons.
PROG
SLOWTRACKING
REW | PLAY | FF |
RECORD | STOP | PAUSE |
SPEED F.ADV SEARCH
CHANNEL Up or Down Selects next higher or lower channel in the VCRÕs channel memory.
CLEAR
Resets time counter to 0:00:00.
Allows you to change entries when setting the clock or VCR for a VCR Plus+ or timer recording.
DISPLAY
Shows VCR operating displays on the TV screen.
Displays the time counter.
F.ADV (Frame Advance) Lets you view one frame with each press of the button while the tape is paused.
FF(Fast Forward)
Fast forwards the tape when the VCR is stopped.
Searches the picture in forward motion during playback.
INPUT
Turns the line input on or off.
L1 appears in VCRÕs display panel and VIDEO appears on TV screen.
Line input refers to the signal coming from the component connected to the audio/video input jacks on the back.
MENU PROG
Displays the VCR MAIN MENU on the TV screen.
Removes a menu from the screen.
Used to program the VCR.
Numbers (0 through 9) Select a channel up to 99 by pressing two numbers.
Select a cable channel over 99 by pressing and holding 1 until 1– – appears on the screen. Then press the other two numbers.
PAUSE
Pauses action for viewing during playback.
Pauses recording to prevent recording of unwanted scenes.
PLAY
Plays a tape.
POWER
Turns off VCR when remote is set to control the VCR.
PREV CH (Previous Channel) Switches between two channels.
Select one channel and then use the number buttons to select another. Press PREV CH to switch between the two channels.
12
