Recording a Program

Recording Audio Only

You can record audio only from another audio source connected to the AUDIO1 or AUDIO2 IN (L and R) jacks on the back of the VCR. Any video on the tape will be erased when you record audio only.

To Record Audio Only

1.Press the INPUT button on remote until the line indicator “L1 (Rear connection)” or “L2 (Front connection)” appears in the VCR’s display panel.

The VCR records audio from the audio equipment connected to the

AUDIO1 or AUDIO2 IN jacks.

2. Use SPEED on the remote to select the recording speed.

The tape speed indicator appears in the VCR’s display panel and on the TV screen.

3. Start playing the audio source. Then, press REC on remote or RECORD on the VCR to begin recording.

The record indicator (D) and the playback indicator (6) appear in the

VCR’s display panel.

4. Press STOP•EJECT on the VCR or STOP on the remote when you are finished.

To Play Back Audio Only

Connect the AUDIO OUT of the VCR to the appropriate input on your amplifier or receiver. Do not use the phono input. Refer to your amplifier or receiver user’s guide for information.

S-VHS Recording ( )

The VCR is capable of recording in VHS or Super-VHS format. To record in S-VHS, use cassettes labeled

with the symbol. It is not possible to record in S-VHS using a standard VHS tape. tapes must be played back in a VCR with S-VHS. S-VHS recordings cannot be played back in VCRs that do not have

the

symbol. Refer to the chart below for the results.

•To record in S-VHS, push the S-VHS AUTO button. The S-VHSindicator light turns on when no tape or an S-VHS tape is inserted. The indicator does not turn on when a VHS tape is inserted.

•To turn off S-VHS and record in VHS, push S-VHS AUTO button. The S-VHS AUTO indicator light turns off.

39