INSTALLING A SPEAKER
CONNECTING POWER
(A) DC OPERATION (with optional BP200SP Battery Pack sold on page 11)
• Open the battery cover located at the back of |
the Speaker unit. Insert the battery making |
sure the side with the contacts (located on |
the top edge) is inserted to make contact |
with the coil springs inside the compart- |
ment. Push the battery all the way in until |
you feel resistance from the coil springs |
inside the compartment. Replace the battery |
cover making certain the cover is secure |
prior to moving the Speaker. |
Note: Be sure the battery cover is secure - |
a falling battery could cause personal injury |
or damage to equipment. |
Speaker | |
Unit | |
DC IN | MODE |
| L - MONO - R |
(B) AC OPERATION |
• Insert the power cord of the large sized 1300 |
mA AC Adapter (provided) into the DC IN |
Jack located at the back of the Speaker unit. |
• Plug the other end of the AC Adapter into a |
conveniently located electrical wall outlet. |
(C) MODE SWITCH |
• For normal stereo use, designate one Speaker |
as LEFT channel and the other as RIGHT |
channel. Simply set one Speaker to “L” for |
Left and one to “R” for RIGHT. If you are |
using a monaural system, set both speakers |
to the MONO position (middle). |
Follow the same steps, as completed above, |
for the other Speaker. |
Speaker | |
Unit | |
DC IN | MODE |
| L - MONO - R |
Wall
Outlet
AC Adapter 1300 mA
5