RCA WSP200 manual Troubleshooting, Problems, Solutions, No Sound, Distorted Audio

Models: WSP200

1 12
Download 12 pages 20.88 Kb
Page 8
Image 8
TROUBLESHOOTING

TROUBLESHOOTING

If you follow all the instructions in this manual, you should have no problems with your WSP200 Wireless Speaker System. However, in case you can not make the system work, please read the TROUBLESHOOTING section carefully. Do not return to your dealer immediately! Check and follow these guides - you probably can resolve your problems without much difficulty.

PROBLEMS

SOLUTIONS

 

 

No Sound

Be sure that both Speakers and the Transmitter are properly

 

powered either by the AC Adapter jacks being firmly

 

plugged in OR by fresh Alkaline batteries in the transmitter.

 

 

 

Be sure the Audio Source is turned ON and operating.

 

 

Distorted Audio

The Speakers are placed beyond the transmitter’s effective

 

range (Approximately 125 feet). You need to bring the

 

Speakers closer to the Transmitter.

 

 

 

The Transmitter is located too close to the screen of your TV

 

set or Computer Monitor (The Screens’ magnetic field can

 

cause some interference to the Transmitter).

 

 

 

Other 900 MHz transmissions are being picked up by the

 

Speaker’s receiver. (Likely from a nearby 900 MHz cordless

 

telephone). To avoid such interference, change to a new

 

Frequency Channel for the Speakers and the Transmitter.

 

 

 

The Batteries on your sound source are too low and should

 

be replaced.

 

 

 

Check the Battery Levels of your Transmitter and

 

Speakers.The batteries may be exhausted and need to be

 

replaced or recharged (if using the BP200SP for the speakers).

Background Noise or Hiss If you have reversed some of the operation procedures (as given on page 5, 1st paragraph Points 1 through 7) so that the Speakers are turned on first, followed by the Transmitter and finally transmitting music from your sound source, some noticeable background noise/hiss can be heard. This is rather normal, as it is merely noise generated from the Pilot Signal. When High Quality music is transmit- ted through the Transmitter, the Pilot Signal will cease and this background hiss will disappear.

8

Page 8
Image 8
RCA WSP200 manual Troubleshooting, Problems, Solutions, No Sound, Distorted Audio