Recoton/Advent AW811 operation manual II. Connecting the Speaker System, Powering the Transmitter

II.ConnectingtheSpeakerSystem

I. Powering the Transmitter

Connect the small, round plug from the transmitter AC power adapter (M) to the transmitter power input jack (I) and plug the other end of the transmitter AC power adapter (M) into any standard 120V AC wall outlet.

Transmitter

AC Power

Adapter (M)

I	120V AC
	wall outlet

Note: Be sure to use the AC power adapter rated 12V DC 100 mA.

Note: There is no transmitter ON/OFF switch. The transmitter is designed to be left plugged in and powered at all times. If you will not be using the AW811 for an extended period of time, you may wish to unplug the transmitter AC power adapter.

II. Connecting to an Audio Source:

i. Connecting to an A/V Receiver:

Transmitter

A/V Receiver

Audio Output

“Y” adapter cable (O)

Audio Input Cable (K)

ii. Connecting to a TV:

1.Connect the included “Y” adapter cable (O) to the 3.5mm mini plug cable coming out of the transmitter.

2.Connect the RCA-type left (white) and right (red) audio plugs on the ”Y” adapter cable to the corresponding left and right audio outputs of your A/V receiver, amp or other audio source.

Transmitter

TV

Audio Output

1.	Connect the included “Y” adapter
	cable (O) to the 3.5mm mini plug
	cable coming out of the
	transmitter.
2.	Connect the RCA-type left (white)
	and right (red) audio plugs on the
	“Y” adapter cable to the

“Y” adapter cable (O)

Audio Input Cable (K)

corresponding left and right audio

outputs on the TV.

iii. Connecting to a Stereo or a Computer:

Transmitter
	Stereo
	1/4” headphone
Audio Input Cable (K)	adapter (P)

Plug the cable coming out of the transmitter into the headphone output of your stereo or the audio output jack on your computer. Use the included

1/4” headphone adapter (P) to convert the 3.5mm plug to a 1/4” plug as needed.

3