Fig. 2 | Fig. 3 | Fig. 4 |
Please be advised that the magnets used in the rib- bon tweeters are very strong so keep all metal ob- jects at least 6 inches away from the front of the speaker.
Installing the Speakers
Each speaker has a clear plastic sheet over the ribbon enclosure to protect the ribbon during shipping. When you are ready to install the speakers, follow these steps to remove the cover: Note that the grille is magnetically attached.
1.Pull the cloth grille cover away from the speaker cabinet at each corner.
2.Remove the plastic cover that is in front of the ribbon. Save the plastic tape cover along with the shipping carton for use when you have to pack the speakers for shipment.
3.Carefully guide each pin from of the grille and align into the receiving sockets located in the speaker cabinet.
5
