Operation
WARNING
•Keep bystanders and animals at least 50 feet (15m) away from the operating point. If you are approached, immediately stop the engine.
■STARTING ENGINE
1.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects as it will start rotating upon starting of the engine.
2.Pump the primer until fuel flows out in the clear tube.
3.Move the choke lever upward to close the choke.
4.Shift the ignition switch to the START position.
5.(For BC2300DL/BC2600DL/BC3400DL)
•While pulling the throttle lever with the little finger of your left hand, pull the starter rope.
(For BC4400DW)
•Lock the throttle lever at the start position as shown in the figure right. While holding the unit firmly against the ground, pull the starter rope vigorously.
