8. Operation
OP6
pulled, push in the choke knob and pull the rope until it starts. Otherwise, remove a spark plug to dry its electrode, and reassemble. Try again the starting operation.
8.When the engine is started, lightly pull the throttle lever and unlock the start setting button. In case of cold start of the engine, apply 1~2 minutes of warming up operation before use.
■STOPPING ENGINE
WARNING
•In an emergency, immediately stop the engine.
•Even after stopping the engine, the cutter blade continues to turn awhile by inertia. Do not touch the blade until it is fully stopped.
•Do not touch a muffler or the spark plug by bare hands immediately after stopping the engine. There is a danger of burn for its high temperature.
1.Return the throttle lever and operate for a while at low speed.
2.OFF the power switch.
(1) | ON | (2) OFF |
(3) | Switch |
|
IMPORTANT
Stopping operation at high engine speed causes extra stress on the engine. Except for emergency, reduce the engine speed by returning the throttle lever, and then apply stop operations.
