RedMax CHTZ2401-CA Stopping Engine OP3, Running in the Engine, Adjusting Idling Speed, Air filter

English

7. Operation

OP5(1)

OP6

(1)

■STOPPING ENGINE (OP3)

1.Release the throttle lever and run the engine for a half minute.

2.Shift the ignition switch to the “STOP” position.

IMPORTANT

•Except for an emergency, avoid stopping the engine while pulling the throttle lever.

NOTE

If the engine won't stop when setting the ignition switch to the stop position, close the choke lever and stop the engine.

In this case, please repair the machine at your nearest servicing dealer.

■RUNNING IN THE ENGINE

IMPORTANT

•During the first 20 working hours, do not use the hedge-trimmer at maximum power for long periods.

■ADJUSTING IDLING SPEED

•Before adjusting the carburetor, clean the air filter and warm up the engine. (OP5)

(1) air filter

•Idle screw is adjusted in order to ensure a good safety margin between idle running and clutch engagement. (OP6)

(1) Idle screw

WARNING

With the engine idling (3000 rpm), the blade should not move. We recommend that you have the dealer or an authorised mechanic carry out any carburetor adjustments.

26