Redring After Sales Service

b) Pump	Check for faulty potentiometer
operates	switch, (located under knob
when motor	'A' inside front cover). Switch
is switched	should be open circuit when
off	turned fully anti-clockwise.

c)Water too Blockage in filter causing

hot	obstruction in water supply.
	Check and clean (see page 10).

d)Water too Blockage in filter causing

cold	obstruction in water supply.
	Check and clean (see page 10).

Diagram 5

2 metres, typical height for majority of users from top of riser rail to base of bath or cubicle

Diagram 6

e)Poor temperature adjustment

Check that the hot and cold water supplies are delivered to the correct ports.

Check that water is supplied to the shower unit at balanced pressures (ie. Hot and cold water are supplied from the same header tank). Ensure cold supply is not taken from mains.

2 metres typical height from top of riser rail to base of bath or cubicle

f)Unit does Check that the shower and all

not prime pipework are sited below the level of the cold water tank.

g)Poor flow Are there any restrictions in

rate	the 15mm supply (reduced
	diameters even for short
	distances).
	Is the pressure being lost to
	other services in the dwelling.
	Check filter for obstructions in
	the water supply and clean if
	necessary. See page 10 for
	details.

We offer a technical advisory service on the telephone to contractors and other customers with problems in the field.

Ring 0870 9000 430 (Normal Office Hours) Spare parts can be supplied against any VISA or Access cards.

Ring 0870 9000 420 (Normal Office Hours) Remember to quote the exact type of shower, as written on the front of the shower and on this leaflet. It may also be of use to have a note of the Catalogue Number as stated on the rating plate inside the shower (see diagram 2 for location)

INSTALLATION INSTRUCTIONS

The installation should be done by qualified personnel and checked by the Electricity Board.

WARNING: DO NOT INSTALL THE SHOWER IN A ROOM WHERE IT MAY BE SUBJECT TO FREEZING.

We recommend that the installation is done in the following sequence :-

A)Fixing the shower to the wall.

B)Plumbing.

C)Electrical connections.

A) Fixing the shower to the wall

The Redring Expressions Power Shower is fitted with a motor and some mechanical noise can be expected when in use. The type of wall structure will affect the noise levels. Solid walls will provide quieter operation than panel or stud partition walls.

1.Place the riser rail at the height recommended in diagrams 5/6 and mark its position.

2.Position the heater so that the sides of the unit are vertical and that all controls can be comfortably reached whilst the shower is being used. Ensure correct orientation of the shower

520TS, 520M specifications

The Redring 520M and 520TS are advanced electric water heaters designed for efficient and reliable performance in residential settings. These models are known for their compactness and versatility, making them a popular choice for various applications, from domestic use to light commercial installations.

One of the standout features of the Redring 520 series is its rapid heating capability. With a powerful heating element, the 520M and 520TS can provide hot water in a matter of minutes, making them ideal for situations where immediate water heating is required. This ensures that users can enjoy hot water on demand without long waiting periods.

The Redring 520M features a manual thermostat for precise temperature control, allowing users to adjust the water temperature according to their needs. Meanwhile, the 520TS is equipped with an advanced digital thermostat that offers a more intuitive interface and precise temperature adjustments. This added functionality makes the 520TS slightly more user-friendly, particularly for those who prefer a digital display.

In terms of design, both models are compact and space-saving, allowing for easy installation in tight spaces such as under sinks or in utility rooms. Their sleek and modern design also ensures they fit seamlessly into various home decors.

Energy efficiency is a critical consideration in today’s eco-conscious world, and the Redring 520 series doesn't disappoint. Both models are designed to provide efficient hot water delivery, minimizing energy consumption while delivering the performance users expect. The insulation used in these units helps to retain heat, further enhancing their energy-saving capabilities.

Safety features are paramount, and the Redring 520M and 520TS come equipped with multiple protective mechanisms. These include thermal cut-off systems to prevent overheating and pressure relief valves to ensure safe operation even in high-pressure situations.

Overall, the Redring 520M and 520TS represent a blend of innovative technology, efficiency, and user-friendly design. Whether for domestic use or light commercial applications, these models stand out for their reliability and performance, making them an excellent choice for those seeking quality electric water heating solutions. With their impressive array of features, they cater to a wide range of hot water needs, ensuring users can enjoy the comfort of hot water whenever desired.

Redring 520M, 520TS Redring After Sales Service, Installation Instructions

Models: 520TS 520M

hot

cold

rate

distances).