Redring manual THE HALOGEN BOILER, L318, LP330, Introduction, Technical Specification

Redring Hotbox Boiler

THE HALOGEN BOILER, L318, LP330

HALOGEN POWERED WALLMOUNTED BOILER

USER&INSTALLERS INSTRUCTIONS

PLEASE KEEP THESE INSTRUCTIONS SAFE. SHOULD YOU MOVE HOUSE, PLEASE

HAND THEM OVER TO THE NEXT OCCUPIER.

1.Introduction

The Halogen Boiler is a wall-mounted appliance, suitable for installation onto small sealed heating systems. It incorporates all the components for sealed system requirements, these include, pressure gauge, pressure relief valve, expansion vessel, circulating pump and manual reset overheat thermostat. A manual air vent is also located on the appliance. There are two controls on the appliance, one adjusts the water flow temperature, and the other is an on/off switch. A 2 m long electrical flex with integral plug enables the appliance to be connected into a standard 13A ring main socket or via the 24 hour plug in timer supplied.

2.Technical Specification

Performance Data		L318	LP330
Electrical Input	kW	6 x 0.300	10 x 0.300
Heat Output to Water	kW	1.71	2.85
Heat Output Convection	kW	0.09	0.15
General Specification		L318	LP330
Product Catalogue Number		29-394601	29-394602
Halogen Bulb Heat Source		6 x 300W	10 x 300W
Electricity Supply		220 - 240V ~ 50 Hz	220 - 240V ~ 50 Hz
External Fuse (supplied plug)		10A	13A
Water Connections Flow		22 mm Copper	22 mm Copper
Water Connections Return		22 mm Copper	22 mm Copper
Expansion Vessel Charge		0.5 bar	0.5 bar
Minimum operating flow temp.		20°C	20°C
Maximum operating flow temp.		70°C	70°C

Page 2 of 13