9.Remove the tie from the bracket on the Right Handrail (105).
Have a second person hold the Right Handrail (105) near the Right Upright (79).
Insert the Upright Wire (86) into the bottom of the Right Handrail (105) and pull it out of the hole in the top of the Right Handrail.
Attach the Right Handrail (105) to the Right Upright (79) with three 5/16" x 3/4" Bolts (4) and three 5/16" Star Washers (9); do not fully tighten the Bolts yet. Be careful not to pinch the Upright Wire (86).
9
Hole | 86 | |
| ||
4 | Tie |
|
9 | 105 | |
4 |
|
|
79 |
|
|
10. Remove the tie from the bracket on the Left | 10 |
Handrail (101). | |
Attach the Left Handrail (101) to the Left Upright | 101 |
(77) with three 5/16" x 3/4" Bolts (4) and three | Tie |
5/16" Star Washers (9); do not fully tighten | |
the Bolts yet. | 4 |
|
|
|
| 9 | 4 |
|
|
|
|
| |
|
|
| 77 |
|
|
11. Have a second person hold the console assem- | 11 | Console |
|
|
|
bly near the Right Upright (79). |
|
|
| ||
Connect the Upright Wire (86) to the console |
| Assembly |
|
|
|
wire. See the inset drawing. The connectors |
|
|
|
|
|
should slide together easily and snap into |
|
|
|
|
|
place. If they do not, turn one connector and try |
|
|
|
|
|
again. IF THE CONNECTORS ARE NOT CON- |
|
|
|
|
|
NECTED PROPERLY, THE CONSOLE MAY |
|
|
|
|
|
BE DAMAGED WHEN YOU TURN ON THE |
|
| Console |
|
|
POWER. |
|
|
|
| |
Then, remove the wire tie from the Upright Wire | 105 | 86 | Wire |
| Console |
(86). Insert the connectors and the excess wire |
|
| |||
into the Right Handrail (105). |
|
| Wire Tie |
| Wire |
Set the console assembly on the Right Handrail |
|
|
|
| |
(105) and the Left Handrail (not shown). Be |
|
|
|
| 86 |
careful not to pinch the wires. | 79 |
|
|
| |
|
|
|
|
| |
| 11 |
|
|
|
|
