3. Press a Base Cap (85) into the Base (60). | 3 |
|
|
|
|
Identify the Right Upright (79) and the Right |
|
|
| 79 |
|
Upright Spacer (83), which are marked with |
|
|
|
| |
“Right” stickers. Insert the Upright Wire (86) | 86 | Wire Tie |
|
|
|
through the Right Upright Spacer as shown. |
| 86 |
| ||
Then, set the Right Upright Spacer on the Base |
|
|
| 83 | |
(60). |
|
|
|
| |
Have a second person hold the Right Upright |
|
|
|
|
|
(79) near the Base (60). See the inset drawing. |
|
|
|
| 85 |
Tie the wire tie in the Right Upright securely |
|
|
|
| |
around the end of the Upright Wire (86). Then, |
|
|
| 60 | |
pull the other end of the wire tie until the Upright |
| 79 |
| ||
Wire is routed completely through the Right | 86 |
|
|
| |
Upright. | Wire |
|
|
| |
|
| Tie |
|
|
|
4. Hold a Bolt Spacer (84) inside the lower end of | 4 |
| 5 |
|
|
the Right Upright (79). Insert a 3/8" x 4" Bolt (5) |
|
|
| ||
with a 3/8" Star Washer (12) into the Right |
| 79 |
|
|
|
Upright and the Bolt Spacer. Repeat this step |
|
|
|
| |
with a second Bolt Spacer (84), 3/8" x 4" Bolt |
|
| 12 |
| |
(5), and 3/8" Star Washer (12). |
|
|
| ||
Hold the Right Upright (79) against the Right |
|
|
| 84 |
|
Upright Spacer (83). Be careful not to pinch |
|
|
|
|
|
the Upright Wire (86). Tighten the 3/8" x 4" |
|
|
| 84 |
|
Bolts (5) until the heads of the Bolts touch the |
|
| 83 |
| |
Right Upright; do not fully tighten the Bolts |
|
|
|
| |
yet. |
|
| 60 |
|
|
|
|
|
|
| |
8
