16.Pull the Short Adjustment Knob (74) out as far as it will go, and insert the end of the Leg Frame (10) a few inches into the Backrest Frame (8).
See the inset drawing. Press the round tab on the Leg Frame Bushing (38), and press the Leg Frame Bushing upward into the Backrest Frame (8). Make sure that the round tab is in the indicated hole in the Backrest Frame.
Then, slide the Leg Frame (10) farther into the Backrest Frame (8), and engage the Short Adjustment Knob (74) into one of the holes in the Leg Frame.
17.Attach the Headrest (20) to the Headrest Frame (9) with two M6 x 18mm Button Screws (55), an M6 x 55mm Button Screw (56), and three M6 Washers (62).
Attach the Backrest (21) to the Backrest Frame (8) in the same way.
16 | 8 |
|
|
| |
| Hole |
|
| 38 |
|
| Tab | 8 |
|
| |
| 10 | 10 |
|
| |
|
| 74 |
|
| Holes |
17 |
|
|
| 20 | 9 |
|
| 62 |
|
| 56 |
|
| 55 |
| 21 | 62 |
|
| |
| 8 |
|
12
