Page 10 FPI FireWizardTM Remote Control Manual
Flame Height Adjustment There are seven levels of flame settings that can be selected manually using the “+” and
“-” button.
Pressing and releasing the “+” button once will increase the flame to a higher setting.
Continuously holding down the “+” button will increase the flame gradually until it has
reached the highest setting.
Conversely pressing and releasing the “-” button once will decrease the flame to a lower
setting.
Examples of the display on the LCD are as follows:
When the unit is turned on, the flame height is set to Hi for 20 seconds by default. After
20 seconds, the flame will revert to the setting prior to being turned off.
When the flame setting is at the lowest level (1), the flame indicator will blink on the
handset, the rear burner will turn off, and the front burner will default to the highest
setting. If the “+” button is pressed, the rear burner will turn on and the flame can
continue to be increased.
Flame Setting = 1 Flame Setting = 3 Flame Setting = 7