FPI FireWizardTM Remote Control Manual Page 13
SETTING THE PROGRAM MODE
It is recommended to unplug the unit while setting the programs.
In this mode, the user can program two On-Times and two Off-Times as well as the
Temperature settings for each day of the week. The PROG button is used to initiate the
programming mode. The “+” and “-” buttons are used to adjust the time and temperature
settings.
Note: The remote needs to be ON in order to set the Programs.
Follow the steps below to set the programs:

1) Programming the On-Time of Program 1

Press and hold the PROG button for 2 seconds or more to initiate the
Programming mode.
The symbol “PROG 1” will flash to indicate the Remote is in Programming mode.
The On-Time for Program 1 will also flash. The “+” and “-” buttons can be used
to adjust this time setting.
The LCD will show the current setting in Program 1 for Monday:
Program 1 On-Time
Programming of Program 1