Page 8 FPI FireWizardTM Remote Control Manual
Manual & Auto Mode Press the “Auto/Man” button to toggle from Auto, Manual & Program mode. See
“Setting the Program Mode” for details on Program Mode.
Manual
In Manual Mode using the “+” or “-” button allows you to adjust the flame height
accordingly. There are seven different levels of flame settings.
Use the “Fan” button to adjust the fan speed. There are 3 different fan speed
settings.
Auto
In Auto Mode using the “+” or “-” button allows you to change the Set
Temperature.
Use the “Fan” button to adjust the fan speed. There are 3 different fan speed
settings.
The default setting of the Remote is to display the temperature in Celsius.
However, the Remote can be changed to display temperature in Fahrenheit by the
following steps:
1. Ensure the Remote is switched off by using the On/Off button.
2. Press and hold the “-” button.
3. While the “-” button is held down, press and release the “+”
b
utton, this will
toggle the temperature display between °C and °F.
This setting is stored in memory hence the Remote will continue to display the
temperature in Fahrenheit even if the battery is replaced.