Regency dimensions Wood Fireplaces, R90 Wood Fireplace

Wood Fireplaces

R90 Wood Fireplace

R90 Wood Fireplace

Model

Emissions

Effi ciency (EPA)

BTU/h (EPA)

Flue Size

Log Size

Shipping Weight

Stripped Weight

R90

3.72g/hr

63%

11,720 (Low) to 42,400 (High)

8” (203mm) Diameter

20” (508mm)

612 lbs. (278 kg)

570 lbs (259 kg)

C F

B

D

		A			E
Unit Dimensions			Description			R90
A			Unit Width w/ standoffs		43-5/8” (1108mm)
B			Unit Height w/ standoffs		50-1/2” (1283mm)
C			Unit Width		38” (965mm)
D			Unit Height		42-5/8” (1067mm)
E			Unit Depth w/ standoffs		28” (711mm)
F			Unit Depth		25” (635mm)
Framing	Description				R90
Dimensions				USA Only		Canada Only
G	Framing Width			44” (1118mm)		44” (1118mm)
H	Framing Height			50-3/4” (1289mm)		50-3/4” (1289mm)
I	Framing Depth			28” (710mm)		28” (710mm)
J	Corner Wall Length			68” (1729mm)		81-1/2” (2072mm)
K	Corner Facing Wall Width			96-1/4” (2445mm)		115-3/8” (2930mm)
L	Inside Corner to Center Vent			24-1/2” (624mm)		31-1/4” (795mm)
M	Unit Corner Clearance			3” (76mm)		9-3/4” (248mm)
N	Inside Chase Framing Width			44” (1118mm)		60” (1524mm)
O	Hearth** Depth			18” (457mm)		18” (457mm)

H

G

L

M

K

CANADA ONLY
N
P	O

USA ONLY
N
I	O
P

J

R

Wood Fireplaces

P	Hearth** Width	40” (1016mm)	40” (1016mm)
Q	Thermal Protection Thickness	1/2” (12.7mm)	1/2” (12.7mm)
R	Combustible Ceiling Height	84” (2134mm)	84” (2134mm)

**Required Non-combustible Hearth with thermal protection - Minimum “K” Factor of 20.07 (CAN) or 0.84 (US)

	Finishing Material
Q	Finishing
	Material
	2-1/2” (64mm)
	Q

Thermal Protection		Z Type
Safety Strip	2-1/2”
		Safety Strip
	Thermal (64mm)
	Protection

NOTE: Hearth requires thermal protection in front of the fi replace and	NOTE: Safety strip is required when the fi replace rests on a combustible
must have at least 1/2" (13mm) Millboard under the fi nishing	surface, and should extend 2” in front and on the sides of the
material with minimum "k" factor of 20.07 (in Canada), 0.84 (in	fi replace. When using a wooden support to raise the fi replace.
US). If the bottom of the unit is raised 4" (102mm) above the	A “Z” type safety strip, not supplied, must be fabricated (Use 20
hearth, the thermal fl oor protection is not required.	gauge galvanized sheet steel).
June 2007 Regency Product Specifications Book	171