MS240, CMS240 (Bronze)
MS240W, CMS240W (White)
Congratulations. You have purchased a Regent motion activated detector for outdoor lighting. When installed properly, this sensor will provide years of convenience and protection for your home and family.
How it works |
| |
Your motion activated detector senses heat from objects such |
| |
as people, large animals and automobile engines . When |
| |
motion is detected, the lights connected to the detector will |
| |
automatically turn on. Once motion has stopped, the lights |
| |
will automatically turn off after a preselected time delay. Your |
| |
motion detector also has a Night Time On and standard flood- |
| |
light feature which will allow your fixture to automatically come | 240 degrees | |
on at night (for a select period of time) or to operate as a |
| |
standard floodlight (manual override). |
| |
|
| |
What you need |
|
|
• Phillips screwdriver |
| |
• Outdoor weatherproof silicone caulking | A | |
• 1, 2 or 3 hole junction box coverplate (A)
What’s included
• Motion detector (B)
• (3) Wire nuts (C)
BC
Common wall and eave mounting applications
What to know
•For outdoor use only.
•UL and CSA LISTED for wet locations.
•This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Under Part 15 of the FCC Rules, any changes or modifications to the motion detector described in this instruction sheet that are not expressly approved by Cooper Lighting could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and if not installed and used in accor- dance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
2
