Step 2: Turn on the power to fixture. Allow fixture to warm up approximately 90 seconds before testing. (Lights may or may not come on during
Step 3: Aim sensor head in desired position. NOTE: Maintain
air spacing between lamps and sensor head, at least | MODE |
| |
1”. Make sure sensor head is positioned with |
|
TEST
SENSITIVITY
control switches facing towards the ground. |
Step 4: Walk across the detection zone at the farthest distance |
you wish your detector to detect motion. |
Step 5: Adjust sensitivity until you get desired results. For |
more range, aim sensor head slightly upwards . For |
less range, aim sensor head slightly downward. Lights |
will turn off 4 seconds after all motion stops. |
Step 6: Move slide switch to 4 MIN or 12 MIN (AUTO mode), |
or to one of the three NIGHT TIME ON settings. At dusk, |
lights will operate in the AUTO or NIGHT TIME ON settings. |
4 MIN
12 MIN
2 HR
4HR
6HR
H
M
L
F
How to select your desired feature
Mode of | Set slide switch | How to set | ||
operation: | on sensor to: | power switch: | ||
|
|
|
| |
Test Setting |
|
|
| |
Lights should turn on with | TEST | Keep the power to | ||
motion both day and | ||||
night. Lights should turn |
| the fixture on. | ||
OFF after 4 seconds. |
|
|
| |
|
|
|
| |
Motion Activated |
|
|
| |
(auto setting) | AUTO 4 MIN | Keep the power to | ||
Lights should turn on with | ||||
motion only at night and | or | the fixture on. | ||
should turn off after 4 or | AUTO 12 MIN |
|
| |
12 minutes of no motion. |
|
|
| |
|
|
|
| |
2 Hour | NIGHT TIME ON |
|
| |
NIGHT TIME ON then |
|
|
| |
Motion Activated | 2 HR |
|
| |
Lights should turn on | (2 Hours) |
|
| |
automatically at night | Note: Once the light has come onin | Keep the power to the | ||
100% brightness for 2 | ||||
the selected NIGHT TIMEONmode, | fixture on. | |||
hours, then reset to | you cannot change the mode setting | |||
|
| |||
regular auto motion | until the next dawn. The light will |
|
| |
operate in the first NIGHT TIMEON |
|
| ||
setting for the remainder | mode selected (2 hour, 4 hour, or |
|
| |
of the evening. | 6 hour), even if changed. |
|
| |
|
|
| ||
|
|
|
| |
4 Hour | NIGHT TIME ON |
|
| |
NIGHT TIME ON then |
|
|
| |
Motion Activated | 4 HR |
|
| |
Lights should turn on | (4 Hours) |
|
| |
automatically at night | Note: Once the light has come onin |
|
| |
100% brightness for 4 |
|
| ||
the selected NIGHT TIMEONmode, | Keep the power to the | |||
hours, then reset to | you cannot change the mode setting | |||
regular auto motion | until the next dawn. The light will | fixture on. | ||
operate in the first NIGHT TIMEON | ||||
setting for the remainder | mode selected (2 hour, 4 hour or |
|
| |
of the evening. | 6 hour), even if changed. |
|
| |
|
|
| ||
|
| (continued) | ||
|
|
4