Regent Sheffield CMS240 MS240W, CMS240W manual Or Night Time on, What to do if

Mode of	Set slide switch	How to set
operation:	on sensor to:	power switch:
6 Hour	NIGHT TIME ON
NIGHT TIME ON then
Motion Activated	6 HR
Lights should turn on	(6 Hours)	Keep the power to
automatically at night	Note: Once the light has come onin
100% brightness for 6		the fixture on.
	the selected NIGHT TIMEONmode,
hours, then reset to	you cannot change the mode setting
	until the next dawn. The light will
regular auto motion
	operate in the first NIGHT TIMEON
setting for the remainder	mode selected (2 hour, 4 hour or
of the evening.	6 hour), even if changed.
Dusk to Dawn Setting
Override Mode	AUTO 4 MIN
(activated only at night)	or	Turn the power “OFF”
Lights should stay on	AUTO 12 MIN
100% brightness from	or	for 5 seconds then
dusk to dawn and then	ALL NIGHT TIME ON	back “ON”.
reset to the AUTO or	MODES
NIGHT TIME ON setting
next dawn.
Continuous Override
Mode (standard
floodlight setting)		Turn the power “OFF”
Lights should stay on	TEST	for 5 seconds then
continuously both day		back “ON”.
and night (must be reset
manually).
Return to Auto	AUTO 4 MIN
or NIGHT TIME ON	or
Settings	AUTO 12 MIN	Turn the power “OFF”
(motion activated)	or	for at least 90 seconds,
From any of the above	ALL NIGHT TIME ON	then back “ON”.
settings.	MODES

What to do if . . .

OUTDOOR LIGHTS DO NOT COME ON WITH MOTION AT NIGHT

Is there power to the fixture?

•Check to see that the circuit breaker has not been tripped.

•Be sure the wall switch is in the “ON”position.

•Be sure that the bulbs are not burned out or broken.

Is the surrounding external ambient light too bright? (If so, the unit may think it’s daytime.)

•Re-aim the head.

•Relocate or reposition the unit away from the light.

TURN OFF POWER BEFORE CONTINUING. Is the wiring to the fixture loose?

•Check wiring, and reconnect if necessary using wire nuts provided.

(continued)

5