Reliable Scale Corporation
4.5 Plot ChartData saved in the DL-04can be transferred to a printer or computer in the form of a chart (Line Pull and Depth vs. Time). Connect the DL-04to the printer or computer with the proper cables & hardware. Be sure the printer/computer is ready to receive the data. The default serial port configuration for the DL-04is 9600 baud, 8 data bits, no parity, 1 stop bit.
Plotting a job does not remove it from the DL-04’s memory. Records are stored permanently in memory and can only be removed by using the Delete Data option (see section 4.3, on page 11). Data transfer can be done as many times as desired before deletion.
Note: The DL-04 has been configured for use with an Epson FX-880 printer with an RS-232 serial interface. Other compatible printers should function, but proper operation is not guaranteed.
1.From the Main Menu, select Plot Chart.
If there is more than one job in memory, the user will be prompted for the job number.
2.Enter job number to plot.
3.During data transfer, the number of the entry currently being plotted is displayed.
| MAIN MENU | |
5 | Plot | Chart | |
6 | Print Data | |
Select | # | more:T |
| | | |
PLOT CHART Job to Print? (3)
F4: Quit
PLOT CHART Plotting record: 457
F4: Quit
Model DL-04 DATA-LOGGER | Page 14 of 38 | Rev. 1.70 |
User Manual | | |