Reliable Scale Corporation

4.6 Print Data

Data saved in the DL-04must be transferred to a host computer for historical storage and analysis. Connect the DL-04to the computer with the proper cables & hardware. Be sure your computer is ready to receive the records. The default serial port configuration for the DL-04is 9600 baud, 8 data bits, no parity, 1 stop bit. A standard terminal program such as Procomm or HyperTerminal can be used for this procedure (see your terminal program manual for details).

Transferring jobs to computer does not remove them from the DL-04’s memory. Records are stored permanently in memory and can only be removed by using the Delete Data option (see section 4.3, on page 11). Data transfer can be done as many times as desired before deletion.

1.From the Main Menu, select Print Data.

If there is more than one job in memory, the user will be prompted for the job number.

2.Enter job number to print.

3.During data transfer, the number of the entry currently being printed is displayed.

 

MAIN MENU

 

6

Plot

Chart

 

5

Print Data

 

Select

#

more:T

PRINT DATA

Job TO Print? (3)

„

F4: Quit

PRINT DATA Printing record: 457

F4: Quit

Model DL-04 DATA-LOGGER

Page 16 of 38

Rev. 1.70

User Manual