Reliable Scale Corporation
5.5 Plot DelayIn order to allow the printer to keep up with the data transfer, a time delay is used. After each line of the chart has been transferred, the DL- 04 waits for a specific amount of time. This length of time is determined by the Plot Delay setting and is measured in milliseconds.
1.From the Configuration Menu, select Plot Delay.
2.The current Plot Delay setting is displayed and the user in prompted for the new setting.
3.Key in the new Port Delay setting. Example: 1500mS
4. To quit, press F4.
| CONFIGURATION MENU | ||
5 | Plot | Delay |
|
6 | Set Password |
| |
Select | # | more:S | |
SET DELAY
Current Delay: 1100
New Delay:
F4: Quit
SET DELAY
Current Delay: 1100
New Delay: 1500
F4: Quit
SET DELAY
Plot Delay: 1500mS
Model | Page 32 of 38 | Rev. 1.70 |
User Manual |
|
|