MAINTENANCE AND CLEANING

SERVICING POLE TRIMMER

The Pole Trimmer is a double-insulated tool and contains some parts that can only be re- placed with original parts by an Authorized Service Center. Visit our Technical Service web site at www.remingtonpowertools. com orcontactourTechnicalServiceDepart- ment at 1-800-626-2237 (English Only) for the nearest Authorized Service Center.

The parts listed on pages 40 and 41 are con- sidered to be user replaceable. See Replace- ment Parts and Accessories for information on ordering these parts.

CLEANING TRIMMER

WARNING: Disconnect Pole Trimmerfrompowersupplybefore cleaning or servicing. Severe in- juryordeathcouldoccurfromfire, electrical shock, or body contact with moving cutter blades.

WARNING: When cleaning Pole Trimmer:

Do not submerse Pole Trimmer in any liquids

Do not use products that con- tain Ammonia, Chlorine, or abrasives

Donotusechlorinatedcleaning solvents,CarbonTetrachloride, Kerosene, or Gasoline.

BLADE REPLACEMENT

WARNING: To prevent serious personalinjury,weargloves when removing and installing the cut- ter blades. Do not place fingers or hands between blades where they could get cut.

1.Unplug pole trimmer from power supply.

2.Place pole trimmer upside down on workbench and remove the four (4) bottom cover screws. Lift bottom cover off (see Figure 17).

Cover Screw

Bottom Cover

Figure 17 - Removing Bottom Cover from Trimmer Head

3.Remove M5 locknut and washer from cam (see Figure 18).

4.Align cam and cutter blade assemby. Remove cam. (see Figure 18).

M5 Locknut

5. Remove screw that holds down cutter

ENGLISH

blade assembly (see Figure 19). IM-

 

PORTANT: Be sure not to loose the

 

8-32 locknut that secures this screw.

 

Screw

 

Cutter Blade

 

Assembly

 

Cam Flange

8-32 Locknut

Figure 19 - Removing Cutter Blade Assembly

6.

Remove and dispose of cutter blade

 

assembly.

7.

Attach new cutter blade assembly to

 

power head with screw and locknut

 

removed in step 5.

8.

Align cutter blade assembly so that

 

the cam will fit properly into the oval-

 

shaped lobes of the cutter blade assem-

 

bly (see Figure 19). IMPORTANT: The

 

large diameter flange of the cam must

 

face upward away from the power head.

 

The small diameter flange of the cam

 

must line up with and sit directly on top

 

of the cam flange.

9.

Replace washer and locknut removed

 

in step 3. Tighten securely.

10.

Replace the bottom cover and se-

Use a soft cloth dampened with a mild soap and water mixture to wipe Pole Trimmer pole, housing, and cutter blades clean. Do not spray or pour water directly onto Pole Trimmer.

Cam

Washer

cure with the 4 bottom cover screws

removed in step 2 (see Figure 17).

Tighten screws securely.

WARNING: All components must be installed and securely fastenedbeforepluggingpoletrim-

Once the Pole Trimmer is cleaned, apply a light coat of oil to the cutter blades to prevent rust and provide lubrication (motor oil is preferred).

Cutter Blade

Assembly

Figure 18 - Removing Cam

mer into power supply. Failure to do so may cause product damage or serious personal injury.

Note: If binding occurs after reassembly, repeat all of the previous steps making sure that cam aligns properly with cutter blade assembly.

11

www.remingtonpowertools.com

Page 11
Image 11
Remington AT3017B owner manual Maintenance and Cleaning, Servicing Pole Trimmer, Cleaning Trimmer, Blade Replacement

AT3017B specifications

The Remington AT3017B is a versatile and innovative grooming device that stands out in the crowded market of personal care products. Designed with efficiency and user comfort in mind, this trimmer is perfect for anyone looking to maintain their appearance without the hassle of frequent salon visits.

One of the primary features of the Remington AT3017B is its advanced cutting system which utilizes stainless steel blades. These blades are known for their durability and precision, enabling clean and efficient trimming. The trimmer provides adjustable length settings, allowing users to achieve their desired hair length with ease. Whether you’re going for a closely cropped look or a more styled appearance, the AT3017B accommodates various grooming needs.

In addition to its cutting capabilities, the Remington AT3017B is engineered with user-centric technologies that enhance the overall grooming experience. The trimmer is designed to be cordless, powered by a robust battery that offers extended use without compromising performance. This wireless operation not only adds convenience but also makes it easy to maneuver around the face and body.

Another noteworthy characteristic of the AT3017B is its ergonomic design. Equipped with a comfortable grip, this trimmer minimizes hand fatigue, allowing for prolonged use without discomfort. The lightweight construction further adds to its portability, making it an excellent choice for travel or on-the-go grooming.

Moreover, the AT3017B is fitted with a washable head, simplifying the cleaning process. This feature ensures that maintenance is hassle-free, which is essential for keeping the device in optimal condition over time.

The Remington AT3017B also comes with several attachments to accommodate various grooming styles. This versatility is crucial for anyone who wants a single tool that can handle hair, beard, and body grooming.

In conclusion, the Remington AT3017B is an all-in-one grooming solution that blends cutting-edge technology with user-friendly features. Its powerful cutting performance, adjustable settings, cordless convenience, ergonomic design, and easy maintenance make it an ideal choice for men seeking an effective grooming tool. Whether for everyday use or special occasions, the AT3017B is designed to deliver consistent results every time.