Remington Essential Guide to Operating the Axcess Trimmer Pole Saw

OPERATING POLE TRIMMER

Figure 6 - Extension Cord Loop Tight Around Molded Cord Hook

Note: An optional method of retaining the extension cord is shown in Figure 7 for use with larger-gage cords that may not fit into the extension cord retainer.

Figure 7 - Optional Method of Retaining Extension Cord

STARTING THE POLE TRIMMER

The Pole Trimmer has a trigger lock button located on top of the handle. This safety feature locks the trigger in the OFF posi- tion, preventing accidental starting of the Pole Trimmer.

The trigger lock button has three posi- tions.

Position 1 locks the trigger.

Position 2allows you to squeeze the trigger and operate the Pole Trimmer. The trigger lock button will automatically spring back to Position 1 when you release the trigger.

Position 3 allows you to lock the trigger in the ON position. This is helpful during continuous trimming for extended periods of time.

Unlocking the Trigger to Start the Pole Trimmer

1.Using your thumb, push the trigger lock button forward to Position 2. Squeeze the trigger lever to the ON position. The Pole Trimmer will start running.

Trigger Lock Button

Position 2

Figure 8-ManuallyOperatingTriggerwith Trigger Lock Button in Position 2

2.Release the trigger lock button while the Pole Trimmer is running. The lock button resets to Position 1 each time you release the trigger to the OFF position.

Trigger Lock Button Position 1

Figure 9 - Trigger in OFF Position with Trigger Lock Button in Position 1

Locking the Pole Trimmer ON

1.Push the trigger lock button forward to Position 2 and squeeze the trigger lever to the ON position. The Pole Trimmer will start running.

2.While the Pole Trimmer is running, push the trigger lock button forward again to Position 3. Hold the button there while releasing the trigger lever, then release the lock button. This locks the trigger lever in the ON position and the Pole Trimmer will continue running.

3.To turn the Pole Trimmer OFF, squeeze the trigger lever and release it. The trig- ger lock button will reset to Position 1, locking the trigger in the OFF position.

Note: If the Pole Trimmer is locked ON

Trigger Lock	ENGLISH
during use and the Pole Trimmer becomes
disconnected from the power supply, Disen-
gage the lock ON feature before reconnecting
to the power supply.
Button Position
3

Figure 10 - Locking Trigger in ON Position with Trigger Lock Button in Position 3

ADJUSTING POLE LENGTH

The Remington brand Pole Trimmer has a telescoping pole assembly that has an ex- tendable range of 10 inches. A cam levered collet is used to hold the pole in position at any extended length.

1.To extend the pole, unlock the clamping lever as shown in Figure 11. Pole will slide freely.

2.Pull inner pole section out to desired length of extension.

3.To lock pole in position, tighten clamping lever as shown in Figure 11.

UNLOCKLOCK

Figure 11 - Extending Telescopic Pole

9 www.remingtonpowertools.com