Cleaning & Maintenance
Getting Started
■It’s a good idea to begin trimming at one of the longest settings (4 or 5) to avoid accidentally trimming hair too short. As you become familiar with the settings you can then select your desired length setting.
■For best results, make sure hairs are clean and
Trimming Hair Length
What to use: trimmer blade with trimmer comb
1.Use the Thumb Wheel to set the trimmer comb to the desired length setting.
2.Turn the unit on.
3.Place the flat top of the trimmer comb against your skin.
4.Slowly slide the trimmer through the hair. Repeat from different directions, as necessary.
5.If hair builds up in the trimmer comb during the trimmer process, shut the unit off, pull off the adjustable trimmer comb, and simply brush or blow the hair off.
Shaping and Edging
What to use: trimmer blade without trimmer comb
Without the comb, the trimmer is perfect for shaping and defining the hairline.
1.Remove the adjustable trimmer comb to expose the trimmer blade.
2.Turn the unit on.
3.Place the cutters lightly against your skin outside the hairline, and slowly sweep the trimmer along the skin toward the desired trim line. Use slow, light
pressure. Too much pressure may trim off more hair than desired. You may find it helpful
to hold the skin taut while you trim
4.After trimming, go over the surrounding areas with the shaver attachment to remove any remaining short hairs.
Shaving
What to use: shaver attachment
For precision or
1.Remove the trimmer comb AND trimmer blade and replace them with the shaver attachment.
2.Turn the unit on.
3.Run the shaver lightly over the area to be shaved. Avoid pressing the shaving head very hard against the skin; this could damage the foil and irritate your skin.
!Never use trimmer or shaver with damaged or broken cutter units.
Blades won’t move even though the trimmer’s on?
■The trimmers may be dirty and clogged. Clean and the unit as described on the next page.
■Make sure the batteries are correctly installed and have not been depleted.
Clean Your Trimmer Regularly
To get the best performance from your bikini trimmer, make sure to clean it between uses. Here’s how:
Weekly
■Turn the trimmer off.
■Remove the trimmer comb and shaver attachments, as described above.
■Push upward on the trimmer blade teeth
to pop it off the unit. ■ Shake or blow out any accumulated hairs.
■ Do not use water on any part of the
Cleaning cautions
■Avoid using harsh or corrosive cleaners.
■Only the trimmer and shaver attachments and the cutter assembly may be removed from the trimmer for cleaning.
■Do not take apart the trimmer blade.
■Use a soft brush to clean away hairs. Do not apply pressure or hard objects.
Storage
■Always store this appliance in a moisture- free area, in temperatures below 140°F (60°C).
This appliance has no user serviceable parts.
8 |
| 9 |
|
|
|
