How to Use
Attachment Combs
These attachment combs are for use with the 30mm trimmer blade only. To attach, gently slide the comb over the trimmer blade. An arrow on the side of the comb indicates the length which the hair will be cut.
Here's what the length settings mean in inches:
Comb attachment Hair length
3mm | 1/8 inch |
7mm | 1/4 inch |
9mm | 3/8 inch |
12mm | 1/2 inch |
Each comb attachment is marked accordingly on its middle surface.
When first using, you may want to begin with the longest attachment comb to avoid trimming hair too short. Cut the hair gradually using short strokes only to work gradually over the entire head. Always take off a little hair at a time, you can always trim off additional hair later. As you work, comb the hair frequently back into the style that you are cutting.
Best Technique
Here are a few tips for trimming the various parts of your face, head and body (For guide only).
To Thin & Taper The Beard & Mustache
■Before you begin, comb your hair in the direction in which it grows so that the hairs are at their maximum height and facing the same direction.
■Attach an attachment comb to the 30mm Trimmer Blade.
■Place the flat top of the trimmer comb against the skin.
■Slowly slide the trimmer through the hair. Repeat from different directions as necessary.
■If hair builds up in the trimmer comb during the trimming process, switch the unit off, pull off the comb and brush/ rinse off.
To Define The Beard & Mustache Line
■Hold trimmer with 18mm Trimmer Blade facing you.
■Start with edge of beard/moustache line and gently lower the Trimmer Blade onto your skin. Use motions towards edge of beard/moustache line to trim to desired locations in facial area and away from beard in neck area.
To Cut Short Hair Styles
■Hairs should be dry and without any waxes or lotions before using trimmer.
■Comb your hair in the direction in which it grows so that the hairs are at their maximum height and facing the same direction.
■Place the flat top of the trimmer comb against the skin.
■Slowly slide the trimmer through the hair. Repeat from different directions as necessary.
■If hair builds up in the trimmer comb during the trimming process, switch the unit off, pull off the comb and brush/rinse off.
To Draw Trim Lines Into Head Hair
■Attach the 30mm or 38mm Trimmer Blade.
■With blade facing the area where you would like to start your trim line, gently lower onto head.
■Move the trimmer gently along your head to create the style you require.
!For more precise designs, attach the 18mm trimmer blade.
Trimming Edge Of Sideburns
■Using the 18mm Trimmer Blade hold the trimmer with blade facing you.
■Start with edge of sideburn, and with the cutting blades resting lightly against your skin, use motions towards edge of side burn line to trim to desired locations in facial area.
Trimming The Nape Of Your Neck
■You will need a hand mirror for this operation if performing it alone - or get your partner to help!
■Before you begin, attach the 38mm T- Trimmer Blade.
■Use your fingers to lift the hair at the base of your head up off the neck. Your index finger should be covering the roots of the hairs you are lifting to prevent accidental removal by trimmer.
■Using your other hand, hold the trimmer to the base of your neck with the cutting unit facing up, and move the trimmer up the length of the neck until the unit touches your finger covering the hair roots at the base of your head. Be sure to move the unit slowly when performing this operation and to keep the hair roots at the base of your head out of the way of the trimmer.
6 |
| 7 |
|
|
|
