New Groomer
CONGRATULATIONS on the purchase of your new Precision® Pivoting Personal Groomer. It contains all the attachments and accessories needed to maintain a
Before Using Your Groomer
■Beard, mustache or sideburn hairs should be dry. Avoid using lotions before using your groomer.
■Be certain hair length attachment is at the desired setting. When first using, you may want to begin on the highest setting (longest hair) to prevent trimming off too much hair initially.
■For
■Use only the adapter provided with the unit.
■Comb hairs outward so they are at their maximum height and facing in the same direction.
■Never use groomer with damaged or broken cutter units.
For assistance or help, call our
customer service at
U.S. or 888
Take a Moment
Be patient when first using your Remington Precision® Pivoting Personal Groomer. As with any new product, it may
Operating Your Groomer
Charging/Recharging
Follow these simple steps:
■Be sure groomer is turned off. Connect the adapter
cord to the charging stand and then adapter into electric wall outlet. Charging
indicator will glow red, indicating groomer is prop- erly charging. A full charge will take approx.
■Your groomer cannot be overcharged, so you can
leave it plugged in and charging between uses. 
However, if the unit is not going to be used for an extended period of time
■Only use the adapter supplied with groomer. Charging should be done at temperatures between 40° and 95° Fahrenheit or it could adversely affect battery life.
■The PG-300 is designed only for cordless operation.
■Your
Trimming Beards or Mustaches
■Before you begin, comb your hair in the direction that it grows so that the hairs are at their maximum height and facing in the same direction.
■Before you begin, make sure that the wide trimmer blade is in the up position. If the narrow, nose and ear trimmer is up, press the button on the back of trimmer head to allow the pivoting head to swivel the wide trimmer (beard/neckline) to the up position.
■Place the hair length attachment on the groomer’s trimmer head and determine how much hair you want to cut. Remember, until you are familiar with using the groomer, it’s always better to select a longer hair setting initially in
order not to trim too much hair.
■ Turn the groomer’s power switch to ON, and
TO TRIM EDGE OF MUSTACHE
■Remove hair length attachment.
■Mustache hairs should be dry and without any waxes or lotions before using trimmer.
■Use the unit’s styling comb or a small comb to comb hairs straight for
trimming.
■ Hold groomer with trimmer cutting blade facing you. ■ Trim hairs using a downward motion following the
direction of your hair growth or trim against your hair growth, whichever is preferred.
NOTE: Since all hairs do not grow in the same direction, you may want to try different trimming positions (i.e., upwards, downwards or across). Practice is best for opti- mum results.
■After achieving desired length, use a downward motion to blend mustache hairs.
NOTE: Use slow and light pressure. Too much pressure may trim off more hair than desired.
■Turn groomer off.
TO TRIM SIDEBURNS
■Comb sideburns following the direction of your hair growth.
■Be certain hair length attachment is ON.
■Hold groomer vertically with front of groomer facing you.
■Trim sideburns using a downward motion.
■Turn groomer OFF.
Hair Length Attachment
The hair length attachment controls the length of the cut. There are four positions for each attachment:
Hair Length Attachment 1 | Hair Length Attachment 2 | ||
0 | – Extra Close | 0 | – Medium |
1 | – Close | 1 | – Medium Long |
2 | – Short | 2 | – Long |
3 | – Medium Short | 3 | – Extra Long |
Your
take a little while to familiarize yourself with it, especially if you are using a groomer for the first time or are using a different brand. Take the time to acquaint yourself with your new groomer, as we are confident you will receive years of enjoyable use and complete satisfaction.
begin trimming.
■ Start trimming under your chin and, following your jawbone line, work toward your ear and upper beard line using an upward motion. Allow the hair length attachment to follow the contours of your face.
■When finished trimming, turn the unit’s power switch to OFF.
To fasten the hair length attachment, place the front hooks on the hair length attachment over the front of the groomer’s trimmer head, and pivot onto backside of the groomer’s trimmer head to lock into place.
To remove, push up on tab on back of hair length attachment.
1
2
